Home > Products > Laser Cleaning Machine

Products

Pulse Fiber Handheld Laser Cleaning Machine

High efficiency.
Simple interface operation.
Hand-held design is easy to carry.

Send Inquiry Chat Now

Description

Product Description

Pulse fiber handheld laser cleaning machine can be used not only to clean organic pollutants, but also to clean inorganic compound substances, including metal rust, metal particles, dust and so on.

machine

Product Parameters

Operating environment
Supply voltage	Single-phase 220V±10%, 50/60Hz AC
Overall power consumption	≤800W
Operating ambient temperature	5℃～40℃
Ambient humidity	≤80%
Optical parameters
Laser average power	≥100W
Power instability	＜5%
Laser working mode	Pulse
Pulse width	2-500ns adjustable
Maximum single pulse energy	1.5mJ
Power adjustment range (%)	0-100 (gradually adjustable)
Frequency adjustment range (kHz)	1-4000 (gradually adjustable)
Fiber length	3m
Cooling method	Air cooling
Cleaning head parameters
Scanning range (length*width)	0-100mm, continuously adjustable; Dual axis supports 8 scanning modes;
Scanning frequency	The highest is not lower than 300Hz
Field lens focal length (mm)	160mm (210mm/254mm/330mm/420mm optional)
Depth of focus	About 5mm

size

Product Operation Steps

Step 1: Take out the handheld cleaning gun in the chassis, ensure that the button switch on the handle is loosened, and remove the dust cover of the lens at the front of pulse fiber handheld laser cleaning machine gun.
Step 2: Take out the external power line to energize, turn on the total power switch, open the key switch.
Step 3: Turn on the start button to power on and initialize the system.
Step 4: After the system is started, set the laser cleaning parameters on the laser cleaning host interface.

Step 5: After laser parameters are set, press the laser enable button on the pulse fiber handheld laser cleaning machine touch screen (before pressing the button, make sure that the button switch on the handle of the handheld head is loosened).

Step 6: Put on laser protective glasses, aim the head of the gun at the cleaned workpiece, press the switch button on the handle of the finger, and the head of the gun can be cleaned with light (please connect the external control line on the laser cleaning host for automatic use, and switch the laser control through the external control signal).
Step 7: After use, loosen the switch on the cleaning head, turn off the enable button on the laser cleaning touch screen, press the start button, turn off the key switch, pull down the main power switch, cover the dust cover of the playing mirror, insert the cleaning gun back into the host placing box, and unplug the power plug.

details

Product Application

Pulse fiber handheld laser cleaning machine can be widely used for the removal of various attachments (paint/rust/oil stains/residues, etc.) on metal and non-metal surfaces.

application