+8613682329217

355nm UV Laser

Oct 09, 2022

Solid State Ultraviolet Laser Origin

Light is the form of energy photons released when electrons in atoms absorb energy, transition from low energy to high energy, and then fall back from high energy to low energy. The laser is the photon queue induced (excited). The photons in this photon queue have the same optical characteristics and the same pace. The solid medium is a kind of ultraviolet laser which can be obtained by one or more frequency conversions of infrared light or near infrared light through a nonlinear frequency doubling crystal.

details

355nm UV Laser Composition

The laser must have the above three parts, working material, pump source and optical resonator, and the laser with solid laser material as the working material. Under the action of the pump source, the working material undergoes particle number inversion distribution and becomes the active material, thus having the amplification effect of light. A part of the amplified light is fed back to participate in excitation, and the resonant cavity generates oscillation. When certain conditions are met, the laser can be generated.

1. Working material: the core of the laser. Only the material that can realize the energy level transition can be used as the working material of the laser.

2. Pump source: It is used to give energy to the working material and excite the atom from low energy level to high energy level. Generally, there are light energy, heat energy, electric energy, chemical energy, etc.

3. Optical resonator: continuous stimulated radiation of working material; Constantly accelerate photons; Limits the direction of the laser output.

part description

355nm UV Laser Marking Principle

The reaction mechanism of ultraviolet laser processing is realized through photochemical ablation, that is, depending on laser energy to break the bonding between atoms or molecules, so that they can be vaporized and evaporated as small molecules. The focus spot is very small, and the processing heat affected zone is very small, so super fine marking and special material marking can be carried out.

product size

355nm UV Laser Marking Application

Application fields: scientific research, laser marking, rapid prototyping, film etching, micro hole processing, scientific research, laser measurement, laser communication, etc.

Marking process: UV laser marking can be applied to: plastic, glass, wood, crystal, circuit board, metal, jade, etc.

Laser cutting: UV laser equipment can be used in many fields in the production of flexible boards, including FPC profile cutting, contour cutting, drilling, covering film window opening, soft and hard bonding board uncovering and trimming, mobile phone case cutting, PCB profile cutting, etc.

Samples

Send Inquiry