Optical fiber laser marking machine is a necessary tool for production and processing. I believe you will also have the problem of unclear marking font or shallow marking font after using it for a period of time. How should we solve it?
Why the mark font of the laser marking machine is not clear?
1. Bad Laser beam quality: the quality of laser directly determines the quality of laser beam. Bad laser beam will affect the marking effect.
2. The beam integrating lens of the laser is damaged and contaminated: at present, there are only three kinds of beam integration lenses of laser marking machine, one is beam expander, the other is field lens, and the third is galvanometer lens. If any of these three lenses has problems, the spot of laser will become weak and poor, so that the typing of laser marking machine is not clear.
3. The marking card signal is disturbed.
4. There is a problem with the galvanometer signal, or the galvanometer is disturbed by the outside world.
Why the mark font of the laser marking machine is shallowness?
1. The optical path deviates.
2. The lenses are dirty and stained.
3. Current problem of marking machine.
4. Marking speed is too fast and filling method is unreasonable.
Through the above introduction, you should know some reasons and solutions for the unclear marking font of the optical fiber laser marking machine. In fact, there are many reasons affecting the unclear marking of the optical fiber laser marking machine. You are not sure. It is recommended to send it to the laser marking machine manufacturer for solution.
