With the development of laser cutting technology, optical fiber laser cutting machine has been widely used. In the process of use, we will also find some problems, such as slow cutting speed, poor cutting accuracy, etc., which may be caused by the loss of optical fiber laser cutting machine in the long-term use process, thus affecting the cutting performance. Let's analyze the reasons for the decline of optical fiber laser cutting machine cutting performance.
1. Power: After the machine is used for a long time, the laser power will drop more or less, which will directly affect the cutting performance of the laser cutting machine.
2. Distance: The distance between the processing workpiece and the nozzle also affects the cutting effect of the laser cutting machine, so it is necessary to adjust the appropriate distance without affecting the cutting performance.
3. Position: The focus position directly affects the cutting progress. The diameter of the focus spot should be as small as possible to produce narrow slits. If the cutting performance decreases, it is a good method to adjust the focus position.
4. Long time overload production, lack of maintenance and improper operation of operators are the reasons for the decline of cutting equipment performance.
To sum up, we have found the reason for the decline in the performance of the laser cutting machine, so we can take preventive measures to effectively avoid or slow down the decline in cutting performance in a timely manner.
1. Pay attention to the maintenance of the machine at ordinary times. Long time processing of optical fiber laser cutting machine will cause wear of parts, which will inevitably affect the cutting performance of the machine. Therefore, daily maintenance is very important. Daily maintenance can be carried out according to the daily maintenance table of the production company.
2. Standardize the operation of the machine. At present, the manufacturers of large optical fiber laser cutting machines will let customers arrange special personnel to receive training, train the machine operation process, and only after the training is qualified can they arrange to work. The operation of special personnel is not only conducive to the normal work of optical fiber laser cutting machines, but also effectively avoid safety accidents.
