Injection molding enterprises often worry about the oil stain on the mold. With the progress of production planning, all kinds of oil stain will accumulate around the mold, which not only damages the service life of the mold, but also greatly affects the qualified rate of finished products. Therefore, oil and glue removal is imperative. The cleaning of the mold can better serve the production, and the bright and oil-free finished workpiece can not be without the support of the mold.
Most of the traditional methods of cleaning molds are to use mold cleaning agents for cleaning operations. The mold needs to be immersed in the solvent, and the proportion of the solvent and water needs to be controlled. After waiting for a period of time, the solvent will decompose the oil stain on the mold surface. When a large amount of water is needed to wash, the mold needs to be dried before it can be put into use. Although the mold cleaning has a good cleaning capacity for grease and dirt, its degreasing, decontamination and cleaning capacity is very strong. However, the whole cleaning process requires a lot of water, and the treatment of the solvent will also pollute the environment and take a lot of time. In the cleaning process, it will also cause some harm to the human body. Moreover, this method is suitable for small and easily moved workpieces, and it is not suitable to use mold cleaner to clean the oil stain and adhesive layer generated by large equipment.
With the continuous development of science and technology, mold cleaning technology is constantly updated. The earliest method was to soak the mold with high-temperature alkaline water, which is very useful for small molds, but not for large molds. The laser cleaning machine can quickly remove the adhesive layer, oil stain, etc. on the mold surface. For uneven samples, where the laser shines, the laser can clean, and the cleaning process can be handled freely.
Advantages of laser cleaning machine
1. Completely solve the environmental pollution problem caused by chemical cleaning.
2. No grinding, no contact, no damage to the substrate, only remove surface contaminants.
3. No consumables, only a little power is consumed during operation.
4. Precise and precise cleaning can be carried out for the designated area.
5. Reduce manpower and solve the problem of difficult employment.
6. Equipped with automatic equipment, easy to detect and control, to achieve automatic cleaning.
