Laser rust removal is to restore the metal to the original copper green, restore the original beauty of the metal, and have a good rust removal and rust prevention effect. The derusting methods of stone materials can be divided into physical cleaning and chemical cleaning. Physical cleaning can be divided into mechanical cleaning, hydraulic cleaning, steam cleaning, ultrasonic cleaning and laser cleaning. Chemical cleaning can be divided into surfactant, chemical solvent, acid, alkali, complexation reaction and biochemical cleaning. Since most of the pollutants of stone materials live in the micropores of stone materials, the general physical cleaning is either difficult to contact or the cost is too high. Therefore, chemical cleaning has become the main means of stone cleaning.
The electrolytic cleaning system discharges the gas to the metal surface, has a sauna effect, removes the dirt and dirt on the metal surface, and completely removes the resin component and moisture; The dirt is blown off by ultrasonic vibration, and the metal adheres to the cathode, and the dirt can be completely removed even in a small corner. The on-site treatment of stone rust should be determined by the reason of drug use. First of all, we should distinguish stone, marble, granite, slate, sandstone, limestone and other materials. Then select the corresponding stone rust remover, and adopt different construction methods, such as brushing, paving and grinding, only for different ground and stone disease severity. ZDA 21 granite cleaning agent is a deep-seated cleaning agent for granite. It can penetrate the pores of the stone, remove the rust spots, yellow spots and water stains of the granite, and do not leave the pigment in the stone, especially the yellow spots on the off white granite such as sesame white. It does not damage the surface luster of granite and can be used at room temperature.
Effective cleaning equipment for cleaning sulfide, gas residue and plastic residue on the mold surface: the electrolytic ultrasonic system of the laser derusting machine is composed of an ultrasonic generation system, a special electrolytic cleaning solution and a high-quality rust inhibitor. Small cleaning machine electrolytic cleaning machine has the advantage of cleaning dirt: even if the shape is complex, it can also remove dirt. The 5-type cleaning machine has good rust removal and rust prevention effect, and can realize complete cleaning and decontamination of the mold.
