Laser welding robot uses semiconductor laser as the welding heat source, so it has been more and more widely used in the welding of camera parts of mobile phones, notebook computers and other electronic equipment. Semiconductor laser (also called laser diode (LD)) is used as the welding heat source of laser welding robot, which makes the application of miniaturized and high-performance laser welding robot system become a reality.
Laser Welding Robot Characteristics
1. It has non-contact property. The minimum diameter of laser formed dots can reach 0.1mm, and the minimum diameter of tin feeding device can reach 0.2mm. It can realize the welding of micro pitch packaging (mounting) components.
2. Due to it is local heating for a short time, the thermal impact on the substrate and surrounding parts is small, and the quality of the solder joint is good.
3. No consumption of soldering iron head, no need to replace the heater, and high working efficiency during continuous operation.
4. When lead-free welding is carried out, it is not easy to produce weld joint cracks.
5. The surface temperature of the solder is measured by a non-contact method instead of a temperature measurement method that actually contacts the solder tip.







