+8613682329217

Maintain Proper Temperature Is Very Important To Fiber Laser Marking Machine

Oct 29, 2021

Under the high temperature environment, the fiber laser marking machine will affect its accuracy, service life and even cause machine failure. Relevant staff who often use the fiber laser marking machine should know that its effect is affected by many factors, such as the most common temperature, Now let's explain in detail the impact of temperature on fiber laser marking machine.

Generally speaking, the main key component of numerical control is the numerical control system, and its working environment is generally between - 5 ° C and + 70 ° C. in this temperature range, high temperature has less impact on the reliability of optical fiber laser marking machine than low temperature. If the temperature is too low, the air pipe and cable can be easily broken, resulting in air leakage, poor connection and other faults

For the motor of the optical fiber laser marking machine, it has little impact, because the optical fiber laser marking machine rarely uses liquid lubricating oil, so there will be no freezing scene, so rest assured! In any case, if conditions permit, it is better to ensure that the workshop temperature is above 0 ℃, which should not be too low. Working under low temperature for a long time is easy to cause excessive mechanical wear and premature aging.

When using the optical fiber laser marking machine, the temperature should not be too high, which will affect the controllability of the NC system, resulting in crash, slow response and other problems. Therefore, it is very necessary to use the optical fiber laser marking machine at an appropriate temperature.

product show

In order to make the optical fiber laser marking machine play a normal effect, it is very important to maintain an appropriate temperature, which will also prolong the service life of the optical fiber laser marking machine. Therefore, the operators must pay enough attention to this aspect.

Send Inquiry