Handheld fiber laser welding machine uses latest generation laser generator. It's equipped with wobble weld head which is developed by us. The machines appear to laser equipment industries, fills in the blank of handheld welding.
Precautions for use handheld fiber laser welding machine
1.You must wear anti-radiation glasses, masks, and safety protective clothing to ensure the safety of the staff in production. All safety accidents caused by illegal operations have nothing to do with the company.
2.It is forbidden to use it with arc welding machines (argon arc welding, electric welding, carbon dioxide protection welding machines) to prevent current backflow from affecting laser components.
3.The welding head must not be aligned with any part of the body during use. Do not place the welding head on the ground, and pay attention to dust prevention at all times.
4.During the welding process, the bending radius of the optical fiber bellows shall not be less than 20cm to avoid burning the optical fiber.
5.In case of any accident, immediately press the emergency stop button.
6.If you temporarily stop working, please click "Stop" to enter the standby state, or if you stop working after work, please click "Stop" to enter the standby state and turn off the device.
7.When replacing the protective lens or inspecting the welding head, the power supply of the equipment must be turned off.
8.The temperature difference between the refrigerator water temperature and the room temperature shall not be greater than 10 degrees! The water temperature is recommended to be set at 26 ℃ - 30 ℃ in summer and 20 ℃ - 22 ℃ in winter. Excessive temperature difference in the cabinet may cause condensation of laser components, resulting in damage to the laser. Anti-freezing measures must be taken when the room temperature is lower than 4 ℃. Ethylene glycol and purified water can be mixed evenly in the proportion of 1:3 and then added into the water tank.
Handheld fiber laser welding machine features
1. Beautiful welding beam and fast welding speed.
2. No chemical no consumables, safe and environmentally friendly.
3. Simple operation, power-on, can be handled or cooperated with robot.
4. The efficiency is very high, saving time.
5. Laser system is stable, almost no repair.
