+8613682329217

Comparison Aluminum Alloy Laser Welding Common Lasers

Jul 25, 2022

At present, the laser welding machine lasers used are mainly CO2 laser source, YAG laser source and fiber laser source.

1. CO2 laser source, has high power, which is more suitable for thick plate welding requiring high power, but the absorption rate of CO2 laser beam on the surface of aluminum alloy is relatively small, causing a lot of energy loss in the welding process.

2. Generally, the power of YAG laser source is relatively small. The absorption rate of YAG laser source beam on the surface of aluminum alloy is larger than that of CO2 laser source. It can be conducted by optical fiber, with strong adaptability and simple process arrangement, but the output power and photoelectric conversion power of YAG are low.

3. Fiber laser source has the advantages of small size, low operation cost, long service life, good stability and high beam quality. At the same time, the light emitted by the fiber laser has a wavelength of 1070nm, higher absorption, 10 times the photoelectric conversion rate of YAG laser, and faster welding speed than YAG and CO2 lasers.

As a high-energy density welding process, laser welding of aluminum alloy can effectively prevent the defects caused by the traditional welding process, and the strength coefficient is greatly improved. Low power laser welding equipment is difficult to weld thick aluminum alloy plates. At the same time, the absorption rate of laser beam on the surface of aluminum alloy is very low, and there is a threshold problem when reaching deep penetration welding, so the process is difficult.

The most interesting feature of aluminum alloy laser welding machine is its high efficiency. To give full play to this high efficiency, it is necessary to apply it to large thickness deep penetration welding. Using laser for large thickness deep penetration welding will be the inevitable trend of future development. Large thickness deep penetration welding highlights the phenomenon of small holes and its influence on weld porosity, so the formation mechanism and control of small holes become more important, and it will become a revolution in the future welding process.

factory

Send Inquiry