This article will provide a detailed introduction on how to replace the fiber laser of a handheld laser welding machine.
Before replacing, the following tools and materials need to be prepared: gloves, glasses, screwdrivers, laser modules, fiber optics, quick connectors, and cleaning agents.
1.Firstly, it is necessary to place the laser welding machine on a stable working surface and turn off the power. Then, the old laser can be disassembled by first unscrewing the fixing screws and pulling out the fiber from the laser module.
2.Next, it is necessary to clean the laser module and fiber optic, wipe the surface with a cleaning agent to ensure that the surface is clean and free of impurities. Then, install a new fiber laser, insert the fiber into the laser module, and tighten the fixing screws using a screwdriver.
3.Finally, a quick connector can be used to connect the fiber optic cable to other devices and start the power supply for testing.
It should be noted that care should be taken during operation to avoid injury or damage to the equipment. After the replacement is completed, it is necessary to organize the tools and materials.
