Nowadays, the technology has been very developed, the technical level has also improved a lot, and there are more and more advanced products. Due to the demand of the industry, people are more convenient and fast. And the laser technology has developed. Compared with the application of precision welding, the traditional mechanical welding equipment has been gradually replaced by laser welding machines. The reasonable application of laser welding machines is conducive to improving the welding efficiency and saving the enterprise cost. How to improve the speed of metal laser welding machine?
There are mainly three basic parameters that affect the laser welding rate: laser output power, laser welding rate, defocusing energy, total flow of protective air or side blowing gas, etc. If you have explored the initial stage of basic parameters of welding technology, the single variable control strategy is a troublesome choice.
In the laser welding process, because the butt weld formation is usually determined by the laser output power and laser welding rate, the defocusing energy will not change after searching for appropriate data. The main purpose is to adjust the laser output power and laser welding rate. You need to generate an appropriate basic parameter dialog for these two basic parameters.
The key factors that affect the laser welding rate of metal laser welding machine are external factors and production and processing of products. The key external factors are the laser operating frequency, laser spot mode and laser beam emission angle, laser output power, appropriate electronic optical molding and auxiliary air, raw material production and processing.
When selecting and matching the final model, we should pay attention to external factors and follow the advice of the laser technical engineer. Another important factor to note is the relative density of laser welding, the total width of laser welding, the depth of laser welding and the overall size of laser points.
