At present, laser welding machines are widely used, and there are many kinds of laser welding machines on the market. Of course, although the laser welding machine is widely used, as a user, the concern is how to distinguish the welding quality, and how to control the laser welding machine is also important for the welding effect. Therefore, the welding effect is judged according to the characteristics of the laser welding machine.
1. Judgment on melting phenomenon during welding
Whether and how strong or weak the melting phenomenon occurs in the welding process mainly depends on the time, power density and peak power of the laser on the material surface. If the above parameters are well controlled, various welding processes can be carried out with the laser. In laser welding machine, the beam focus position is one of the key control process parameters. Under a certain laser power and welding speed, the maximum penetration depth and the best weld shape can be obtained only when the focus is within the optimal position range.
2. Understand the welding method of laser welding machine
There are two common laser welding methods. One is continuous laser welding, which is mainly used for the welding and cutting of large and thick pieces. During the welding process, a continuous weld is formed; The other is pulsed laser welding, which is mainly used for the welding of single point fixed continuous and thin materials, forming circular welding spots during welding; Generally speaking, the selection of welding materials, laser welding machine and processing workbench are the main factors affecting the laser welding effect.

3. Frequency selection of laser welding machine
Generally, when using the laser welding machine, the frequency parameters will be adjusted as much as possible according to the customer's requirements for efficiency. The frequency plays a very important role in the requirements of welding efficiency, especially for some precision laser welding machines, when they can cooperate with the galvanometer and scanning system, the frequency will play a more important role. How to adjust the appropriate frequency will be a technical problem, but the role of the frequency will also be related to other aspects. The perfect welding effect can only be achieved if there is an overall effect.
4. Monitoring of tensile strength
The tensile strength can be monitored, and the problem of the laser welding machine can be judged according to the inspection results. In case of poor welding, faulty solder joints and other problems during processing, it is not necessarily the problem of the welding machine at this time. It may be that the material is not suitable. After changing the material or changing the waveform setting of the laser welding machine, the welding shall be conducted again, and the effect shall be evaluated.







