The weather has turned hot recently, and everyone's clothes are getting cooler and cooler.
So what maintenance measures should be taken for the laser equipment?
Many experienced industry partners may know that the antifreeze should be replaced in time.
But there are still many doubts:
Can I replace it with water? What are the replacement steps?
Temperature conditions for replacing antifreeze: the local temperature is greater than 0 ℃.
Procedure for replacing antifreeze:
1.Clean the antifreeze inside the water cooler and laser.
2.Clean the water tank of water cooler and laser pipeline twice with clean water, and drain the water.
3.Clean the filter screen, filter element of the water cooler (some water coolers have it, which can be confirmed by the equipment manufacturer) and the filter screen at the water inlet of the laser (some models of lasers do not have it, which can be confirmed by our after-sales service engineer), and install it. If the filter screen and filter element are damaged, new parts need to be replaced.
4.Add a certain amount of distilled water or deionized water to the water cooler.
