Since the introduction of fiber laser cutting machine, the productivity in the field of metal processing has greatly improved. Due to its high accuracy, small cutting seam, fast speed, and small cutting deformation, the quality of processed products is much better than traditional processing quality. Currently, laser cutting equipment accounts for a large proportion in the metal processing industry.
During the use of the device, there may be some problems to some extent. The same applies when using a laser cutting machine, for example, during the laser cutting process, although the parameters are set well, cutting errors still occur. At this point, we need to start from the root cause of the problem, find the cause, and make adjustments to solve the problem. Let's take a look at the reasons for the errors.
1.The product itself has geometric errors. For example, if the processed product itself is uneven or has small particle residues on its surface, the default cutting process is to set flat plate cutting data. If the product surface is uneven, different areas may be heated unevenly during cutting, causing the thin plate surface to overheat and melt, while the thick plate surface may not be able to melt through. Due to surface roughness, the laser focus randomly changes with the position and ideal position of the processed object surface.
2.Programming error in fiber laser cutting machine processing, the machining trajectory on complex surfaces is fitted with lines, arcs, etc. There is an error between the fitted curve and the actual curve. These errors result in errors between the relative position of the actual focus and the surface of the processed object and the ideal programming position.
3.The actual thickness of the material exceeds the cutting range. For example, a device with a power of 1500W can cut up to 12mm thick carbon steel plates. Now, forcibly cutting 14mm carbon steel plates, even if they can be cut through, there will definitely be errors or slag hanging at the bottom. So before cutting, it is necessary to determine the thickness of the board and the actual thickness that the equipment can cut. Quality accuracy beyond the cutting range cannot be guaranteed.
4.During the cutting process of fiber laser cutting machine, errors in the focus position can also lead to errors during cutting. Many factors can change the relative position of the focus and the surface of the product, which will also affect the accuracy of the processed product. For example, the clamping method of fixtures, the level of placement of the machine tool itself, and the degree of wear of the bed rack. Checking before cutting can reduce errors.








