+8613682329217

Check The Laser Marking Method in Glass Products

Sep 29, 2024

laser marker

Glass products are widely used in construction, daily use, chemical, home, electronics, instrumentation, nuclear engineering and other fields. Glass has fragile characteristics, so engraving on the surface of glass products is very demanding. Laser marking machine is non-contact processing, short processing time, fine marking line, very suitable for marking patterns or text information on the surface of glass materials. Use a laser to mark the glass in the following ways.
Laser radiation is used to produce marks with obvious Outlines on the glass surface. A few days later, the laser extends to the area near the original mark to form fragments, and then multiple times of radiation is used to heat the areas adjacent to the marked area through heat conduction, so that these areas form a stress gradient, thereby reducing the possibility of secondary cracking. This method is very effective in marking sodium-calcium glass and borosilicate glass. Small glass bottles containing liquid medicines and glasses in daily life can be marked with this method.

2. Annular crack method formed at discrete points

A series of ring-shaped cracks are used to form text, bar codes, square or rectangular codes, and other shape code patterns. The general use of this method is more CO2 laser marking machine, CO2 laser marking machine set a glass marking and coding parameters caused by less cracks. Discrete points appear to form annular cracks. The glass produces low density annular cracks through heating and cooling cycles. When the glass is heated, expansion compresses the surrounding material, and when the temperature is raised to the temperature of the glass softening point, the glass rapidly expands to form a dome of low-density material that protrudes from the glass surface.

Using CO2 laser marking machine, businesses can mark exquisite patterns on the surface of the glass and make the grade of the glass.

3. Produce cracking surface crack method

The process of heating and cooling is used to change the surface of the affected glass, which is not immediately visible, but begins to produce turtle cracks along the laser-marked area after a little pressure. Cracked surface glass can play a non-transparent effect of ice cracking, so it is widely used in interior decoration, such as partition, background wall, and can also be used in glass furniture, which is loved by consumers.

4. Laser online marking machine marking glass

Laser can form a very fine beam, fine marking on the glass material, any complex text, graphics, images, trademarks, logos, bar codes, two-dimensional codes, production batch numbers, autographs, etc., can be completed by laser marking machine.

Send Inquiry