
The beam quality of the laser marking machine has an important influence on the marking effect. Beam quality includes beam diameter, beam focusing, beam centroid and beam peak power. In the marking process, the beam quality will directly affect the marking quality, speed and stability. The effect of beam quality on the marking effect will be discussed in detail below.
First of all, the beam diameter has an important effect on the marking effect. The beam diameter determines the focus of the beam, the smaller the diameter, the higher the focus, and the better the energy can be concentrated in a small area. Therefore, the smaller the beam diameter, the finer the marked lines and patterns, and the higher the resolution. In the application of fine marking and fine scale, it is necessary to use a laser marking machine with a smaller beam diameter to achieve higher accuracy and clearer marking effects.
Secondly, the focusing degree of the beam also has an important influence on the marking effect. Focusing refers to the ability of the beam to converge to a point, affecting the concentration and distribution of energy. During the marking process, the high-focus beam is able to concentrate energy better, making the marking effect more obvious and greater depth. However, the low-focus beam is prone to scattering and divergence, resulting in fuzzy or uneven marking effect. Therefore, in order to obtain a better marking effect, it is necessary to choose a laser marking machine with a higher focus.
In addition, the centroid of the beam will also have a certain effect on the marking effect. The center of mass is the location of the cross section center of the beam. When the center of mass of the beam is parallel to the surface of the marker, the marking effect. If the beam's centroid is at a different Angle from the surface of the marker, the beam energy will be partially reflected, resulting in unwanted burns and residue in the marked area. Therefore, during the marking process, attention should be paid to adjusting the centroid of the beam so that it is parallel to the surface of the marker to obtain a better marking effect.
The peak power of the beam will also affect the marking effect. The peak power refers to the peak energy in the laser pulse, which determines the force of the laser on the surface of the marker. Higher peak power is better able to convert light energy into heat energy in a short period of time, resulting in fast and deep engraving results. The lower peak power may cause the marking effect to be less obvious or require a longer marking time. Therefore, in the selection of laser marking machine, it is necessary to choose the appropriate peak power according to different application requirements to achieve better marking effects.
In summary, the beam quality of the laser marking machine has an important impact on the marking effect. The beam diameter and focusing degree determine the delicacy and resolution of the mark, the centroid determines the consistency and uniformity of the mark, and the peak power determines the depth and speed of the mark. Therefore, when applying the laser marking machine to mark, it is necessary to fully consider the influence of the beam quality, and select the appropriate laser marking machine and parameters to achieve better marking effects.






