Sequence of optical fiber laser cutting machine
1.Turn off the exhaust fan or dust collector;
2.Turn off the high voltage of the fiber laser, return the machine tool to the original point, and then turn off the control system as required. After the control system is turned off, press the power off button to turn off the power supply of the control system and turn off the main power switch of the bed;
3.Turn off the chiller;
4.Turn off the cold dryer and the control valves of each gas circuit;
5.Turn off the air compressor;
6.Turn off the key switch of the fiber laser, and then turn off the power switch or leave the key switch and power switch on to keep the fiber laser charged. It can be quickly started up and used the next day;
7.Turn off the voltage regulator;
8.Turn off the power switch of each branch and the main power switch of optical fiber laser cutting machine.
Reminder: please switch on and off in strict accordance with the switching on and off sequence, which can effectively reduce the risk of internal condensation of fiber laser and reduce the failure of fiber laser.
